All prices are exclusive of GST
Part No. 0635 1052
- Intuitive: clearly structured measurement menu for air velocity measurement and volume flow in laboratory fume cupboards according to DIN EN 14175-3/-4
- Precise: automatic absolute pressure compensation guarantees accurate measurement results
- Convenient: hot wire probe with a short response time
- Intelligent calibration concept
For measurements in fume cupboards: use the fume cupboard probe (with the compatible measuring instrument) to measure air velocity, volume flow and air temperature.
Use the fume cupboard probe (hot wire probe) with the compatible testo multifunction measuring instrument (please order separately) to determine air velocity, volume flow and air temperature. It is particularly suitable for low air velocities up to +5 m/s.
Fume cupboard probe – features and areas of application
Fume cupboard testing plays an important role in ensuring the safety of those who work with substances that are harmful to health. For example, the fume cupboard offers protection against explosions as well as hazardous gases and vapours.
Use the fume cupboard probe to measure the inflow rate and exhaust air volume flow in laboratory fume cupboards in accordance with DIN EN 14175-3/-4. This will guarantee that the fume cupboard is set up correctly and can function properly for your customer.
Use the fixed cable to connect the fume cupboard probe to the measuring instrument (please order separately). The clearly structured measurement menu for volume flow makes the measuring instrument intuitive to operate. The volume flow is precisely calculated thanks to convenient input of the size and geometry of the duct cross-section. Timed and multi-point mean calculation, average volume flow, current reading and min./max. values are displayed in the measuring instrument. To ensure accurate measurement results, air density compensation is carried out via the integrated absolute pressure measurement.
Intelligent calibration concept
You will get exceptionally accurate measurement results with the digital probe, because the measuring instrument makes measurement uncertainty a thing of the past. You only need to send the probe in for calibration – so the measuring instrument remains in continuous use.
Fume cupboard probe with fixed cable (length 1.4 m) including calibration protocol
Temperature - NTC
Measuring range 0 to +50 °C
Accuracy ±0.5 °C
Resolution 0.1 °C
Velocity - Hot wire
Measuring range 0 to 5 m/s
Accuracy ±(0.02 m/s + 5 % of mv)
Resolution 0.01 m/s
General technical data
Storage temperature -20 to +60 °C
Dimensions 350 x 50 x 40 mm
Operating temperature 0 to +50 °C
Cable length 1.4 m
Probe head diameter 10 mm
Standards EN 14175 3/ 4
- Contact Us
Domestic Shipping Rates:
- NZ Standard Shipping $12
- Heavy Good Shipping $22.50
- Chatham and Stewart Islands $56.50
- FREE shipping when you spend over $300
Important note: Please provide a physical address for delivery. We do not deliver to PO Boxes or Parcel Pods.
Testo Instruments New Zealand
C/- Eurotec Ltd
750C Great South Road
Ph: 09 579 1990