Flue Gas Analyser Set with Printer - Testo 310 II

 All prices are exclusive of GST

 Part No. 0563 3105

• Simultaneous, individual measurement and display of all relevant measurement parameters
• Simultaneous, additional measurements via the testo Smart App
• Easy and intuitive menu guidance
• Digital documentation, data transfer and customer data management
  

The testo 310 II has two measurement cells for O2 and CO, and a temperature sensor integrated into the flue gas probe. The gas sensors measure the exact oxygen and carbon monoxide content as well as the flue gas and ambient temperature. From these data, all relevant measurement parameters such as CO2 value, degree of effectivity and flue gas loss are calculated.

In addition, the measuring instrument has its strengths in measurement accuracy, configurable measurement display, parallel measurement options, intuitive operation, sturdy housing, connection option to the testo Smart App: Our flue gas analyzer testo 310 II offers everything that heating fitters and technicians need for practical work on heating systems.

Scope of Delivery

Flue gas analyzer testo 310 II incl. printer and calibration protocol for the measurement of O2, CO, hPa and °C, probe 180 mm with cone, silicon hose for pressure measurement, thermal paper, particle filters 5 off. and case.

Temperature - TC Type K 
Measuring range -4° to 212 °F / -20 to +100 °C
Accuracy ±2 °F / ±1 °C
Resolution 0.1 °F / 0.1 °C
Reaction time < 50 s
Temperature (ambient temperature)

Temperature - TC Type J 
Measuring range 32° to 752 °F / 0 to +400 °C

Accuracy
±1.5 % of mv (> 212 °F) / ±1.5 % of mv (> 100 °C)
±1.8 °F (32° to 212 °F) / ±1 °C (0 to +100 °C)
Resolution  0.1 °F / 0.1 °C
Reaction time < 50 s

Temperature (flue gas)

Flue gas O₂
Measuring range 0 to 21 Vol.%
Accuracy ±0.2 Vol.%
Resolution 0.1 Vol.%
Reaction time t₉₀ 30 s

Flue gas Draft
Measuring range
-8 to +8 InH₂O / -20 to +20 hPa

Accuracy ±1.5 % of mv (Remaining Range)
±0.01 InH₂O (-1.20 to +1.20 InH₂O) / ±0.03 hPa (-3.00 to +3.00 hPa)
Resolution 0.01 InH₂O / 0.01 hPa

Efficiency (calculated)
Measuring range 0 to 120 %
Resolution 0.1 %

Flue gas loss (calculated)
Measuring range 0 to 99.0 %
Resolution 0.1 %

Pressure measurement
Measuring range -16 to +16 InH₂O / -40 to +40 hPa
Accuracy ±0.2 InH₂O / ±0.5 hPa
Resolution 0.1 InH₂O / 0.1 hPa

Flue gas CO (without H₂-compensation)
Measuring range 0 to 4000 ppm

Accuracy
±10 % of mv (2001 to 4000 ppm)
±20 ppm (0 to 400 ppm)
±5 % of mv (401 to 2000 ppm)

Resolution 1 ppm
Reaction time t₉₀ 60 s

Ambient CO
Measuring range 0 to 4000 ppm

Accuracy
±10 % of mv (2001 to 4000 ppm)
±20 ppm (0 to 400 ppm)
±5 % of mv (401 to 2000 ppm)

Resolution 1 ppm
Reaction time 60 s

General technical data
Dimensions 8 x 3 x 2 in. / 201 x 83 x 44 mm
Operating temperature 23° to 113 °F / -5 to +45 °C
Display function Graphic 7-line display
Power supply Battery: 1500 mAh, mains unit 5V/1A
Storage temperature -4° to 122 °F / -20 to +50 °CC
Weight (with probe) 23 oz. / Approx. 660 g 

Faster, productive - tune ups, maintenance, and more...

Whether you need to perform basic or more complex combustion tuning, perform maintenance or safety checks, or install new combustion units, the fully featured testo 310 delivers more combustion parameters. Use the 310 for accurate heating adjustment so you can get it right the first time - every time.

Simple to use with reliable results

The testo 310 eliminates the need for look up charts and the purchase and disposal of expensive chemicals. The kink-resistant hose is integrated into the housing to eliminate leaks. The stainless steel probe and cone-stop is perfect for residential furnace, boiler and water heater applications. With five different fuels to select from, it provides the flexibility you need for your tuning opportunities.

Right residential combustion measurement every time

The testo 310 residential combustion analyzer represents a new class of instruments for Testo and provides exceptional value and expanded capabilities in combustion testing. The 310 sets a new standard in reliable combustion tuning with its rugged housing, simple design and advanced sensor technology.

The easy-to-read backlit display shows more measurements which provides more complete picture of the combustion process. Simple top-of-display icons show you the current measurement functions. After only 30 seconds the 310 is ready to test.

Full featured – for better testing and tuning

• O2, CO (w/ NOx filters standard), CO2

• Draft & Pressure

• Temperature (flue & ambient)

• Combustion efficiency & excess air

• Undiluted CO (CO air free)

• Ambient CO

Product Brochures

• Product brochure Testo 310 II (PDF)

Manuals

• Instruction manual Testo 310 II (PDF)