All prices are exclusive of GST
Part No. 0560 0882
- Image quality: IR resolution 320 x 240 pixels
- SuperResolution technology to 640 x 480
- Thermal sensitivty <50mK
- Built in digital camera + Telephoto lens
The Testo 882 professional class infrared camera is the most precise one-hand thermal imaging camera with pistol grip design from Testo. Special measuring modes including moisture image or high temperature option make it ideal for a wide variety of different applications.
Crisp, clear thermal images taken from a wide angle; parallel digital real images of the same measuring object with manual or motor-driven focusing. The Testo 882 thermal imaging camera gives you this and much, much more. In fact, it gives you everything you need to take, document, and analyse the thermal images of the object you have measured.
Areas of use for the Testo 882 infrared camera
Quality control in the building sector and water damage restoration, maintenance of mechanical and electrical installations, precise high-temperature measurements, prevention of mold, energy advice. The Testo 882 infrared camera has all the features you need to carry out a wide range of different thermal imaging tasks.
The impressive details of the Testo 882 thermal imaging camera
76,800 temperature measuring points for precise thermal imaging and crisp, clear images:
- Infrared resolution 320 x 240 pixels, thermal image quality enhanced to 640 x 480 pixels thanks to optional SuperResolution technology.
- Thermal sensitivity < 50 mK for measuring even the smallest temperature differences
- 32° lens for quick ‘n easy coverage of larger image sections, can be focused manually or with motor
- Automatic hot/cold spot recognition for instant critical temperature depiction
- Built-in digital camera with power LEDs for parallel real and thermal images
- Free IRSoft PC software for professional analysis of thermal images. TwinPix technology for overlapping images on your PC monitor. Ideal for allocating thermal images, documenting results and for planning further measures
- Voice annotations via headset
Special measuring modes for even more precise thermal imaging
Special measuring modes and functions broaden your measuring spectrum and provide even more precise measurements for faster results:
Solar mode for identifying faults at photovoltaic systems: enter the externally measured radiation intensity of the sun at the point in time at which the image was taken into the camera. This value is saved alongside each of the thermal images to allow correct comparisons to be made.
Special measuring mode for detecting places where there is a risk of mold: the infrared camera can use the externally measured ambient temperature and humidity and the surface temperature to calculate the moisture value of each measuring point and depict it as a real moisture image.
High temperature option: the measuring range can be increased to 550°C for even more flexibility.
testo 882, Rugged case, IRSoft pro PC software, Soft case, Shoulder strap, SD card, USB cable, Power adaptor, Li-ion battery, Adapter for tripod, Lens cloth, Headset
Please view the Brochure on the download Tab to view technical data for the Testo 882 thermal imager.
Infrared image output
Focus manual and motor focus
Infrared resolution 320 x 240 pixel
Image refresh rate 33 Hz
SuperResolution (IFOV) 1.1 mrad
SuperResolution (Pixel) 640 x 480 pixels
Geometric resolution (IFOV) 1.7 mrad
Minimum focus distance 0.2 m
Field of view 32° x 23°
Thermal sensitivity <50 mK at +30 °C
Image output visual
Minimum focus distance 0.4 m
Image size 640 x 480 pixels
Display option IR image only; real image only; IR image / real image
Colours 10 (iron, rainbow, rainbow HC, cold-hot, blue-red, grey, inverted grey, sepia, Testo, iron HT)
Display type 3.5" LCD with 320 x 240 pixels
Video output USB 2.0
Reflected temperature manual
Measuring range -20 to +100°C; 0 to +350 °C (switchable)
High temperature measuring +350 to +550 °C
Accuracy ±2 °C,; ±2% of mv / (±3% of mv at +350 to +550 °C)
Surface moisture distribution Included
Humidity measurement Optional
Solar mode – manual Included
Analysis function Up to 2 measurement points, hot/cold spot recognition, isotherms, area measurement (min/max on area)
Digital camera Included
Video streaming Included
Voice recording wired headset
Standard lens 32° x 23°
File format image .bmt; export option in .bmp; .jpg; .png; .csv; .xls
Storage device SD card 2 GB (approx. 1.000 images)
Battery type Fast-charging, Li-ion battery can be changed on-site
Operating time 4 h
Charging options In instrument / charger (optional)
Mains operation yes
Storage temperature -30 °C; 60 °C
Operating temperature -15 °C; 40 °C
Housing protection class IP54
Air humidity 20 to 80 %RH non-condensing
Weight 900 g
Tripod mounting M6
Dimensions 152 x 108 x 262
System requirements Windows XP (Service Pack 3); Windows Vista; Windows 7 (Service Pack 1); Windows 8; Interface: USB 2.0
Standards, tests, warranty
Checking as part of mechanical maintenance
Signs of wear in machinery often become apparent long before a malfunction, due to an increase in temperature. Possible causes are friction, incorrect adjustment, tolerances of mechanical components or a lack of lubricant. With a thermal imager, any suspicious changes can be spotted immediately. The main advantage of using thermography in a maintenance operation: it is non-contact and can therefore be carried out on all mechanical installations during operation and from a safe distance.
Typical applications for the thermal imager:
- Checking engines
- Checking bearings
- Checking shafts
Reliable high temperature measurement
Testo thermal imagers adapt to the requirements for applications with high scene temperatures. With the high temperature option, the measuring range can be flexibly extended up to 550 °C . The high-contrast presentation on the display is achieved via the high-temperature iron HT colour palette or the special histogram adjustment.
Detecting structural defects and ensuring construction quality
Analysis with a Testo thermal imager is a fast and efficient method of detecting possible structural defects. Furthermore, Testo thermal imagers are ideal for providing proof of the quality and the correct implementation of construction measures. Any heat losses, humidity and areas of air permeability in a building are visible in the thermal image. The testo 870 thermal imager makes it possible to detect faulty thermal insulation and structural damage – all using a non-contact method!
- Typical applications for the thermal imager:
- Checking the air tightness of windows and doors
- Finding insulation defects and thermal bridges in the building shell
- Detecting areas that are prone to mold
Checking as part of electrical maintenance
In electrical installations or cables, increased temperatures are always an indication of an overload, an imminent malfunction or an existing defect. Testo thermal imagers facilitate evaluation of the heat status of low, medium and high-voltage systems. Thermographic images lead to the early detection of defective components or connections, so that the necessary preventive measures can be introduced in a targeted way. Thermography therefore minimizes dangerous fire risks and prevents costly production downtimes.
Typical applications for the thermal imager:
- Checking switch cabinets
- Checking electrical connections
- Monitoring and checking photovoltaic systems
- Checking as part of mechanical maintenance
Preventing mold formation
Thermal bridges waste energy. Condensation can also form in such places due to the humidity in the ambient air. As a result, mould forms in these locations with the associated health risks for the occupants. Testo thermal imagers use the externally determined ambient temperature and humidity as well as the measured surface temperature to calculate the relative surface moisture value for each measuring point. This means mould formation is shown on the display before it becomes visible to the naked eye: areas at risk are displayed in red, areas not at risk are displayed in green. This makes it possible to introduce measures to prevent dangerous mould formation at an early stage - including in hidden corners and niches.
Providing comprehensive energy advice
In building thermography, infrared technology is particularly suitable for quick and effective analysis of energy losses in buildings’ heating or air conditioning systems. Thanks to their high temperature resolution, Testo thermal imagers provide detailed images of inadequate insulation and thermal bridges. They are ideal for the recording and documentation of energy losses on outer windows and doors, roller blind casings, radiator niches, in roof structures or the entire building shell. Testo thermal imagers are the perfect measuring tool for comprehensive diagnosis and maintenance uses, and whenever providing energy consultation services.
- Contact Us
Domestic Shipping Rates:
- NZ Standard Shipping $10
- Heavy Good Shipping $20
- Chatham and Stewart Islands $50
- FREE shipping when you spend over $300
Important note: Please provide a physical address for delivery. We do not deliver to PO Boxes or Parcel Pods.
Testo Instruments New Zealand
C/- Eurotec Ltd
750C Great South Road
Ph: 09 579 1990